Technical Advice
Prezfit Nylon
Prezfit Nylon
Step 1
Cut the HDPE pipe to length with pipe cutter or saw.
Step 2
Slide the nut with the back end going onto the pipe.
Step 3
Slide the compression ring onto the pipe.
Step 4
Push the fitting into pipe until the butt end. Then make sure the compression ring is also pused to the putt end of the fitting.
Step 5
Fasten the nut with hand follow by tightening with pipe wrench.
Step 6
Neat and clean – Simply easy and reliable joint.
Prezfit Nylon
Step 1
Cut the HDPE pipe to length with pipe cutter or saw.
Step 2
Slide the nut with the back end going onto the pipe.
Step 3
Slide the compression ring onto the pipe.
Step 4
Push the fitting into pipe until the butt end. Then make sure the compression ring is also pused to the putt end of the fitting.
Step 5
Fasten the nut with hand follow by tightening with pipe wrench.
Step 6
Neat and clean – Simply easy and reliable joint.
PRODUCTS & SERVICES
CONTACT US
Copyright © 2021
Top Floor Trap Manufacturer Malaysia, Spind.
All Rights Reserved
PRODUCTS & SERVICES
CONTACT US
Copyright © 2021
Top Floor Trap Manufacturer Malaysia, Spind.
All Rights Reserved